Pine Live Edge Wood Slab #E068 125" x 12" - 17" x 1.9"

$300.00
Wood Species Pine
Length 125"
Width (min) 12" ; (max) 17" ; (avg) 13"
Nominal Thickness 1.9"
Board Feet 21'
Square Feet Of Both Sides 23'
Calculated Weight 86 lbs
Kiln Dried Yes
Live Edge Character High
Figure Wild
Surface Finish Level Planed

Contribution To A Multi-Slab Panel

See Below

With 1 Side Cut Straight (1 Live Edge Remains)

8"

With 2 Sides Cut Straight (No Live Edges Remain)

6"

About this lane

Pine

Pinus spp. (Southern Yellow Pine group: Pinus taeda, P. palustris, P. echinata, P. elliottii; also P. strobus)

Southern Yellow Pine built the South: hard, dense, with an excellent strength-to-weight ratio, and old-growth longleaf is the heart pine of reclaimed floors and beams. It is a group of species, not one, which is why the row has no single Janka.

Origin
Southeastern United States (yellow pines); eastern North America (Eastern White Pine)
Working & finishing

The yellow pines work fairly well with most tools, but resin gums up tools and clogs sandpaper, so the shop keeps fresh paper on the sander and wipes with mineral spirits before finish. All five species glue and finish well; Eastern White Pine is easy to work with hand and machine tools. Pine blotches under stain, so a clear oil or hardwax on kiln-dried stock is what OCC recommends, and a film finish suits a workbench or farm table. Working pine has been reported to cause skin reactions and asthma-like symptoms in sensitive people.

Care

Wipe spills and clean with a damp cloth. Hardness depends on the species: the yellow pines at 690 to 870 lbf are a serviceable soft-to-medium top, Eastern White Pine at 380 lbf dents from a fingernail. Heartwood is only moderate to low in decay resistance and sapwood has none, so pine stays indoors. Expect moderate seasonal movement.

You may also like