Red Oak Live Edge Wood Slab #G998 54" x 27" - 35" x 2.1"

$620.00
  • Species: Red Oak
  • Cut / Edge: Live Edge
  • Length: 54"
  • Width: 27" - 35"
  • Thickness: 2.1"
  • Board Feet: 23.6
  • Surface Finish: Planed
  • Live Edge Character: High
  • Figure: Wavy
  • Kiln Dried: Yes
  • Approx. Weight: 87 lbs
  • Slab ID: G998

Red Oak heartwood is light to medium brown with a reddish cast, and the paler sapwood is not always sharply set off from it. Grain is straight with a coarse, uneven texture, and the pores are open enough to blow air through a short piece end to end. It machines well with hand and power tools, and that open grain drinks oil or wants a grain filler under a film finish, so plan the finish before you sand. Rated non-durable, it belongs indoors. It suits dining tables, desks, benches and shelving, and it is the value pick among our oaks. Ours is milled and kiln dried in Zebulon, NC.

About the wood

Red Oak

Quercus rubra

Arguably the most popular hardwood in the United States and the value pick among OCC's oaks. Its 3 to 6 ft trunks give OCC its widest slabs.

Janka
1290 lbf
Density
44.0 lb/ft³
Origin
Northeastern United States and southeastern Canada
IUCN Red List
Least Concern
Working & finishing

Machines well with hand and power tools and scores near the top in machinability. The very large open pores drink oil and telegraph through thin film finishes unless filled, so plan the finish before sanding. Like white oak it blackens on wet iron; use coated or stainless fasteners. Oil and hardwax warm the pink toward amber; a filled film finish gives a flat smooth top.

Care

Indoor use only; rated non-durable with poor insect resistance. Wipe spills quickly because the open pores wick water, and seal both faces of a finished top. Expect the most across-the-width seasonal movement of the Tier 1 oaks; the base must allow it.

You may also like