(Pre-Built) Hickory Live Edge Tabletop #PB269 100" x 37" - 44" x 1.5"

$1,400.00
  • Species: Hard Maple
  • Cut / Edge: Live Edge
  • Length: 100"
  • Width: 37" - 44"
  • Thickness: 1.5"
  • Board Feet: 41.7
  • Surface Finish: Planed
  • Live Edge Character: Medium
  • Figure: Wavy
  • Kiln Dried: Yes
  • Approx. Weight: 153 lbs
  • Slab ID: PB269

Hard Maple is the pale one: sapwood from nearly white to an off-white cream, sometimes with a reddish or golden hue, and heartwood a darker reddish brown. Grain is generally straight but may be wavy, with a fine, even texture, and curl, quilt or birdseye figure carries a premium when it appears. It is the hardest and densest of the commercial maples, so keep cutters sharp; it burns under a slow router pass and blotches under stain, which is why we finish it clear with oil or hardwax. It suits kitchen islands, workbenches, cutting boards and dining tops that see hard use. Ours is milled and kiln dried in Zebulon, NC.

About this lane

Hickory

Carya spp. (true hickories: C. tomentosa, C. ovata, C. glabra, C. laciniosa); reference page Carya tomentosa

Among the hardest and strongest woods native to the United States, harder on average than white oak or hard maple, and sold as a mix of four true hickories and often pecan, which is itself a hickory.

Origin
Eastern United States
IUCN Red List
Least Concern
Working & finishing

Difficult to work: tearout is common in machining if cutting edges are not kept sharp, and the wood blunts edges quickly, so OCC runs fresh knives, light planer passes and the drum sander for the final surface. The Wood Database pages consulted do not rate hickory's gluing or finishing. An oil or hardwax finish keeps the two-tone heartwood and sapwood bands plain to see; a film finish suits a top that needs spill protection.

Care

Wipe spills promptly and clean with a damp cloth. Hickory has the highest shrinkage of OCC's Tier 1 species, so expect more seasonal width movement than oak or walnut and keep the top on a base that lets it move. Indoor use only; hardness is not rot resistance.

You may also like