$1.50/sqft

$3/sqft

This machine really lives up to its name! A true timesaver in our shop with 3 sanding heads, consisting of a 14" rubber segmented contact drum, platen, & platen setup.

This 22,000lb beast is 120hp with a 10hp feed, that depending on sandpaper selection, will generally remove about .03" or 1/32" per pass.

We usually run this machine with 60, 100, & 150-grit paper. Producing a very flat panel, this is normally the last step before entering our hand-finishing process.

Almost everything we make goes through this machine!